Sunday, December 21, 2008

Repair a run in berber carpet

If you look closely at the run in your berber carpet, you will notice little spots of hard glue at the bottom of every loop that has pulled loose.

To repair the carpet, all you have to do is hot glue the berber loops onto the carpet backing (duplicating the original)

put a 1/2 inch long bead of hot glue into the very end of the channel in your carpet that was vacated by the pull.

Tuck a few of the loops (from the pulled carpet) back into the glue filled channel being careful to orient the fibers the way they were before being pulled (look for the hard glue spots from the original manufacturing process)

allow hot glue to cool and harden after every two or three loops, then extend the glue bead, extend the repair, and repeat until finished.

Jim Stallings (owner)
MonsterClean carpet, rug, & tile cleaning

Monday, November 24, 2008

All about Monster Clean Carpet Cleaning

Monster Clean Carpet Cleaning, Serves Virginia Beach, Norfolk, Portsmouth, and Chesapeake, va

What’s so DIFFERENT about us?

MonsterClean owns and operates the largest, most powerful truck mounted mobile carpet steam cleaning plant in operation in the state of Virginia.  There is not one single machine of comparable power at work anywhere else in this state. 

MonsterClean uses powered rotary steam wands to clean deeper.  Our RX-20 Rotary Hot Water Extractor delivers an amazing 650 highly effective steam cleaning cycles per minute.  That’s a lot of scrubbing (agitation) of your carpet fibers.  In fact, it’s much more agitation than is humanly possible using the standard steam wand our competition is using.

MonsterClean is capable of delivering a constant flow of 280 degree water to the carpet surface, a temperature our competition simply can’t match, even in short pulses.

MonsterClean has the power and the hose to reach deep into your facility.  We have successfully demonstrated our ability to clean in two separate locations on the 13th floor of a high rise at the same time from a single MonsterClean truck parked in the building’s loading dock. 



Dry times are typically less than two hours when cleaning residential carpets.

MonsterClean pre-treats the entire area that is to be cleaned before extraction begins.     

By applying all of the detergents before cleaning begins, we maximize the action of our chemicals, while allowing for a thorough clear water rinse.

 MonsterClean has earned a five star rating from the nations largest on-line contractor matching agency, Service Magic™.

MonsterClean ensures there is at least one technician on every job-site certified by the International Institute of Cleaning and Restoration Certification (IICRC).  Trained technicians get better results, especially when remediating stubborn stains like ink, print toner, grease, or urine.

MonsterClean is a quality first company.  We know the value of referral marketing.  Jim Stallings, the owner, says his goal is to “make every new customer a client, and every client a MonsterClean evangelist.”  So try us out today, then start spreading the good word.

We want your friends and coworkers to be MonsterClean evangelists, too!


Sunday, November 9, 2008

Get rust out of carpet ( Self help method )

Professional carpet cleaners know that RUST is one of the easiest stains to remove from carpet.  
Wet the stain by spraying water from a trigger sprayer.  Use Q-Tip to apply Bar Keepers friend or CLR to the rust stained area.  Massage a small amount of Baking soda into the area.  Rinse with water.

Why this works:  Both CLR and Barkeepers Friend have oxalic acid as their main ingredient.  Oxalic acid dissolves rust, and makes it water soluble.

complements Jim Stallings
Owner, MonsterClean